Jeger Metal Structur

Product description

Jeger Metal Structur is a striking decorative effect that gives your wall a metallised structure with characteristic vertical pitting and abrasion. You will achieve a raw and minimalist look on the walls, which will bring an industrial loft atmosphere to the interior. The ready-to-use decorative material can be easily applied to a selected wall surface or a part of it and will allow you to make a metamorphosis of your interior without the need for laborious renovation.

The effect consists of two complementary products: compound Jeger Metal Structur and Jeger Loft Metal Metaliza – a special metallization layer available in 3 original colors.

How to do that? It's just 3 steps

You only need three tools.

Paint roller

+

Plastering trowel

+

Paint roller

1

Spread primer

Apply Jeger Primer Metal Structur to a clean, dry, dust-free and degreased wall (according to the instructions on the packaging). Use a microfibre roller for this. Leave to dry for approximately 4 hours.

2

Apply decorative effect

Jeger Metal Structur mix thoroughly. Do not dilute – the product is ready to use. Do not mix with other products. With a trowel, apply one coat to the thickness of the grain (approx. 1 mm). Make vertical „scratch marks” in the slightly dried compound with a trowel. Then gently smooth the surface. Apply at a temperature of +8°C to +25°C, at a relative humidity of max. 82%, avoiding draughts. Allow to dry for approx. 12 hours.

3

Apply metallization layer

Apply Jeger Loft Metal Metaliza to the dried surface using a sponge roller. Apply the product in all directions, do not press the roller too hard. Allow to dry for approx. 2 hours.