Product description

Jeger Mirror is a two-component, transparent, highly protective and washable decorative coating with a mirror effect. It protects against water and dirt. For surfaces exposed to increased wear and water.

Substrate preparation

The surface to be secured must be dry, paved, free of dust and dirt. Apply Jeger Primer Mirror according to the instructions on the packaging and leave to dry for 4 hours.

Product preparation

Do not dilute with water. Do not mix with other products. Contents of the entire package Jeger Primer Mirror component B add to package Jeger Primer Mirror component A and mix thoroughly. Leave the container open for 2-5 minutes, then mix again. The product can be used for about 30 minutes after mixing the ingredients. If you need to use more packages, prepare the next ones only after finishing the application of the first one.

Note: After mixing the components, the product may give off heat (this is a natural characteristic of the product). Remember not to close the container in which the mixed components A and B are located, as this may cause the temperature to rise and the product to harden prematurely.

Product application

Apply a very thin layer of the prepared product with a Venetian trowel, spreading it in all directions with movements. Apply at a temperature between +8°C and +25°C, with a relative humidity of max. 82%, avoiding drafts. Leave to dry for 24 hours. The product is fully resistant to mechanical damage after full curing (5-7 days). After finishing painting, wash the painting tools using acetone, for example.

Tip: Applying another layer results in a higher gloss and a smoother surface. You can apply the second layer after the previous one has dried using another set of products.