Product description

Jeger Stone is a decorative product designed to create an effect Jeger Beton. Used to achieve an effect that imitates natural stone.

Instructional video

Take a look at the instructional video to help you choose the right application technique.

How to do that? It's just 3 steps

You only need three tools.

Trowel

+

Paint roller

+

Sponge

1

Apply decorative effect

Jeger Beton mix thoroughly. Do not dilute, the product is ready to use. Do not mix with other products. Apply a thin layer with a Venetian trowel to the thickness of the grain. Then smooth gently. If you want to create pits, apply and remove the trowel from the freshly applied mass. During the initial drying stage, gently smooth the entire surface. If you want to change the effect, after approx. 4 hours you can apply another layer and repeat the entire process. Leave to dry for approx. 12 hours.

2

Protect surface

Apply to the dry surface with a new, unused roller Jeger Protector Beton – matte protective varnish. The varnish may slightly change the shade of the surface.

3

Apply Jeger Stone using a sponge

Stir the product before use. Do not dilute with water. Do not mix with other paints. Apply to a completely dry and varnished surface Jeger Beton apply a thin layer evenly Jeger Stone. Apply the product using a sponge for decorative effects, do not rub the product too hard. Remove excess as you go.