Product description

Jeger Decorative wax for Stiuk effect is a wax that allows you to create additional decorative effects in the form of “veins” and rub marks, or to achieve increased gloss on the decorated surface. The product protects the coating against dust and dirt and ensures water resistance.

Surface preparation

The product is intended for use on the finished surface of the Jeger Stiuk decorative effect.

Product application

Mix the wax thoroughly before use. Do not dilute with water. Apply an even, thin layer of wax to the completely dry surface of Jeger Stiuk using a trowel. Leave to dry for 4 hours. Then polish (preferably with a polishing pad) until the desired effect is achieved. If you want to achieve a “veined” effect, before applying the wax, gently scratch the edge of the trowel to create a veined pattern on the surface of the dried Stiuk effect, and then apply the wax in the desired color with a trowel. Polish after approx. 4 hours. Apply at a temperature between +8°C and +25°C, with a relative humidity of max. 82%, avoid drafts. The polishability depends on the ambient temperature. Once opened, use the entire product. Wash tools with warm water after finishing work.