Product description

Jeger Renovation resin It is a transparent protective resin that can be used both indoors and outdoors, e.g., on stone, brick, ceramics, wood, concrete, etc. It creates a satin coating that protects and restores the original appearance of the surface. Suitable for use on walls, facades, plinths, small garden architecture, etc. It protects surfaces from dirt, water, algae, fungi, and lichens. The coating is resistant to changing weather conditions and UV radiation..

Surface preparation

The substrate should be dry, clean, and durable. Clean previously painted surfaces of any contaminants that may reduce the adhesion of the varnish, such as dust, grease stains, rust, fungi, and mold.

Product application

Mix the product thoroughly before use. Do not dilute with water. Do not mix with other products. Apply with a roller or brush. Apply the resin irregularly, spreading it in all directions, avoiding vertical and horizontal movements. For wooden elements, apply the resin along the wood grain. Apply at a temperature of +8°C to +25°C, with a relative humidity of max. 82%, avoid drafts. Leave to dry for about 6 hours. Apply the second coat in the same way. Leave to dry for 24 hours. After finishing painting, wash the painting tools with warm water.

Please note: The product may slightly change the shade of the renovated surface. Before painting the entire surface, it is recommended to test the product on a less visible part of the surface to be decorated. The product is intended for vertical surfaces.