Jeger Hologram
Decorative effect for walls, which, thanks to a metalizing film, allows you to achieve the effect of gold, silver, copper or bronze
Choose color
Gold
Silver
Bronze
Copper
Buy in
Product description
Jeger Hologram is a decorative effect that will bring a subtle aura of luxury to your interior, while adding a distinctive touch. Thanks to the use of metalizing foil, you will get an amazing wall decoration with a dazzling effect: gold, silver, copper or bronze. The unevenly colored texture with a three-dimensional appearance attracts the eye and gives the wall a unique depth and shine. Jeger Hologram perfectly harmonizes with various interior styles. It will add elegance to modern arrangements, bring a subtle glow to industrial spaces, and give classic rooms a modern twist. It's a versatile solution that will fit your unique style!
How to do that? It's just 6 steps
You only need four tools.
Paint roller
Plastering trowel
Plastering trowel
Paint roller
Spread primer
On a clean, dry, dust-free and degreased wall, apply with a microfiber roller Jeger Primer Hologram Black (according to the instructions on the package). Leave to dry for about 4 hours.
Apply decorative effect
Jeger Hologram mix thoroughly. Do not dilute, the product is ready to use. Do not mix with other products. Using a trowel, apply a layer to the thickness of the grain (about 1 mm). Apply the product in stages, do not apply to the entire surface at once.
Make the structure
In the drying mass, make vertical "abrasions" with a brush trowel for structures. Then gently smooth the surface with an ordinary trowel. Apply at a temperature of +8°C to +25°C, at a relative humidity of max. 82%, avoid drafts. Allow to dry for about 12 hours.
Apply glue
On the dried surface, using a small roller, apply glue generously (in vertical motions) under one strip of film (preferably at about 25 cm). Glue and foil can be found at: Jeger Hologram Set (metallic foil + adhesive).
Apply the film
On the damp adhesive surface, apply one strip of film to the full height of the wall and press gently. Note: apply the film with the matte side to the adhesive. Then, in a similar manner, apply more strips of film, so that each overlaps the previous one, about 1-2 cm wide. Leave it to dry. After about 4 hours, in a steady motion, peel off all subsequent strips of film from top to bottom, starting from the last one.
Protect surface
Apply to the entire decorated surface Jeger Protector Hologram according to the application instructions.
Tips
Plan the various stages of work - apply successive layers of Jeger products to smaller parts of the wall, gradually covering the entire surface; pay attention to the phase of making abrasions with a brushed trowel to the structures to level them gently with an ordinary trowel; then apply the film in batches, matte side to the glue, and when dry, peel off the film in strips from top to bottom, starting with the last laid!
Remember: if you need to use more than one package of the product, before applying, mix the contents of all packages together. Check the effect on a small area before doing the whole thing and before varnishing. The product is intended for interiors.
Download the application manual
