Jeger Enamel for sanitary fittings in Spray Gloss
Spray enamel, glossy white, non-yellowing, for fittings and sanitary ceramics, for exterior and interior use.
Buy in
Product description
Special, moisture-resistant white enamel for sanitary ware. Ideal for renovating bathtubs and bathroom fittings. Resistant to direct contact with water and light. Does not yellow.
Surface preparation
The substrate should be dry, clean, degreased, and stable. Damaged (e.g., flaking and cracked) coatings, such as previous paint, should be removed and cleaned.
Product application
Before use, shake the container vigorously for approx. 2 minutes to mix the product thoroughly. The surface to be painted must be at the same temperature to avoid problems with adhesion and finish. Apply the paint by holding the container upright at a distance of approx. 20-30 cm from the surface to be painted. The paint should be sprayed both horizontally and vertically. Shake regularly during use. The next coat can be applied after a minimum of 20 minutes. After finishing the work, leave to dry completely for 24 hours. Use in dry areas, protected from wind or drafts and with good ventilation. After use, clean the nozzle by turning the container upside down and pressing the spray button for two seconds.
Color RAL 3020
Downloads
Manufacturer: Global Point Sp. z o.o. Sp.K., ul. Rozwoju 3, Biskupice Podgórne, 55-040 Kobierzyce, e-mail: jeger@jeger.pl, tel. +48 887 71 71 04