Product description

Jeger Millennium 10 Satin is a satin, stain-resistant latex paint with antifungal and antibacterial properties. It is characterized by the highest resistance to scrubbing. A satin coating resistant to stain and dirt removal. Its special formula ensures unique application parameters and very good mechanical properties. The use of advanced encapsulation technology and the content of silver ions (Ag+) ensures long-term protection of the coating against fungi, algae, mold, and bacteria. Low Volatile Organic Compounds (VOC) content makes this product environmentally and human friendly.

Surface preparation

The substrate should be dry, clean, and durable. Remove damaged (e.g., flaking and cracked) coatings of previous paints, adhesive paints, and lime paints. Fill surface defects with a suitable filler and sand them down. Clean previously painted surfaces of any contaminants that may reduce paint adhesion, e.g., dust, grease stains, rust, fungi, and mold. Prime the prepared substrate using Jeger Gel Primer or Jeger PRO Millennium Primer. Paint fresh plaster after the seasoning period (3-4 weeks after application), after sanding, dusting, and priming with Jeger gel primer or Jeger PRO Millennium Primer.

Product application

Stir the paint thoroughly before use. Do not dilute with water. Do not mix with other paints. Apply with a brush or roller. Spray application is possible (if necessary, the paint can be diluted by adding max. 5% water). Apply at a temperature of +8°C to +25°C, with a relative humidity of max. 82%, avoid drafts. Apply the next coat after about 2 hours. If using containers from different production batches, mix them in a larger container to prevent color differences. The paint coating achieves its full strength properties 28 days after completion of painting work carried out in accordance with the manufacturer's instructions. After finishing painting, wash the painting tools with warm water.

The product is prepared on individual order and is not returnable.