Product description

Jeger Millennium All in One Joint compound it is designed for finishing walls and ceilings inside rooms. It is perfect for both new plaster and for repairing and renovating existing surfaces. It can be applied locally or over the entire surface on all absorbent substrates such as plaster, concrete, gypsum plasterboard, porous concrete, walls, bricks, cement-chipboard, construction adhesives, and other absorbent materials. The product is ready to use, characterized by high vapor permeability, easy sanding, simple application and processing. It allows for an exceptionally smooth and aesthetic surface.

Substrate preparation

The substrate should be dry, clean, sound, dust-free, free from grease, salt and biological contaminants such as mold and algae. Remove any damaged (e.g., flaking or cracked) coatings, adhesive paints, and lime. The product is not suitable for use on damp substrates. To increase adhesion, strengthen the substrate and uniform the absorbency of the surface, it is recommended to use a deep-penetrating primer.

Product application

Mix the product thoroughly before use. Apply manually or by machine (minimum nozzle diameter 0.033") at a temperature between +8°C and +25°C, with a maximum relative humidity of 82%, avoiding drafts. Apply a layer up to 2 mm thick at a time. After finishing work, wash tools with warm water.