Product description

Jeger Primer Brillant for decorative effect Jeger Brillant. It evens out the absorbency of the substrate, strengthens and increases the adhesion of the decorative effect, and allows for proper application to achieve the desired result.

Surface preparation

The substrate should be dry, clean, and stable. Remove any damaged (e.g., flaking or cracked) coatings, adhesive paints, and lime. Fill any surface defects with a suitable filler and sand smooth. Clean previously painted surfaces of any contaminants that may reduce paint adhesion, e.g., dust, grease stains, rust, fungi, and mold.

Product application

Jeger Primer Brillant mix thoroughly. Do not dilute with water. Do not mix with other products. Apply the first coat with a microfiber roller, spreading it in a crisscross pattern, irregularly in all directions. Allow to dry for 2 hours. If necessary, apply a second coat if the substrate color shows through. Jeger Primer Brillant and leave to dry for 2 hours. After this time, the surface can be covered with Jeger Brillant. Apply at a temperature between +8°C and +25°C, with a maximum relative humidity of 82%, avoiding drafts. After finishing work, wash tools with warm water.