Product description

Jeger Primer Cristal this is a base for decorative effects Jeger Cristal. It evens out the absorbency of the substrate, strengthens and increases the adhesion of the decorative effect, and allows for proper application to achieve the desired result.

Substrate preparation

The substrate should be dry, clean, and stable. Remove any damaged (e.g., flaking or cracked) coatings, adhesive paints, and lime paints. Fill any surface defects with a suitable filler and sand down. Clean previously painted surfaces of any contaminants that may reduce paint adhesion, such as dust, grease stains, rust, fungi, and mold.

Product application

Jeger Primer Cristal Mix Jeger Primer Cristal thoroughly. Do not dilute with water. Do not mix with other products. Apply the first coat with a microfiber roller, spreading it in a crisscross pattern, irregularly in all directions. Leave to dry for 2 hours. After this time, the surface can be covered with a decorative effect. If necessary, apply a second coat of Beger Primer Cristal if the base color is clearly visible. Apply at a temperature between +8°C and +25°C, with a relative humidity of max. 82%, avoiding drafts. After finishing work, wash tools with warm water.