Product description

Jeger Protector Shabby for decorative effect Jeger Crudo. It evens out the absorbency of the substrate, strengthens and increases the adhesion of the decorative effect, and allows for proper application to achieve the desired result.

Surface preparation

The substrate should be dry, clean, and durable. Remove damaged (e.g., flaking and cracked) coatings of previous paints, adhesive paints, and lime paints. Fill any surface defects with a suitable filler and sand them down. Clean previously painted surfaces of any contaminants that may reduce paint adhesion, e.g., dust, grease stains, rust, fungi, and mold.

Product application

Mix the product thoroughly before use. Do not dilute with water. Do not mix with other products. Apply the first coat with a microfiber roller, spreading it in a crisscross pattern, irregularly in all directions. Leave to dry for 4 hours. After this time, the surface can be covered with a decorative effect. Apply at a temperature between +8°C and +25°C, with a relative humidity of max. 82%, avoid drafts. After finishing the work, wash the tools with warm water.