Product description

Jeger Primer for structural paints this is a primer for: Jeger Baranek, Jeger Sand, or Jeger Raufaza. It evens out the absorbency of the substrate, strengthens and increases the adhesion of textured paint, and allows for proper application to achieve the desired effect.

Surface preparation

The substrate should be dry, clean, and durable. Remove damaged (e.g., flaking and cracked) coatings of previous paints, adhesive paints, and lime paints. Fill surface defects with a suitable filler and sand them down. Clean previously painted surfaces of any contaminants that may reduce paint adhesion, e.g., dust, grease stains, rust, fungi, and mold.

Product application

Jeger Primer Cristal mix thoroughly. Do not dilute with water. Do not mix with other products. Apply the first coat with a microfiber roller, spreading it in a crisscross pattern, irregularly in all directions. Leave to dry for 2 hours. After this time, the surface can be covered with a decorative effect. If necessary, if there are visible patches of the substrate color, apply a second coat of Jeger Primer for textured paints. Apply at a temperature of +8°C to +25°C, with a relative humidity of max. 82%, avoid drafts. After finishing the work, wash the tools with warm water.