Product description

Jeger Primer Industrial is a primer for decorative effects Jeger Industrial. It evens out the absorbency of the substrate, strengthens and increases the adhesion of the decorative effect, and allows for proper application to achieve the desired result.

Substrate preparation

The substrate should be dry, clean and sound. Remove any damaged (e.g. flaking and cracked) coatings of previous paints, adhesive paints and lime. Fill any surface defects with a suitable filler and sand down. Clean previously painted surfaces of any contaminants that may reduce paint adhesion, e.g. dust, grease stains, rust, fungi and mould.

Product application

Jeger Primer Industrial Mix thoroughly. Do not dilute with water. Do not mix with other products. Apply the first coat with a microfibre roller, spreading it in a criss-cross pattern, irregularly in all directions. Leave to dry for 2 hours. After this time, the surface can be covered with a decorative effect. If necessary, apply a second coat of Jeger Primer Industrial if the base colour is clearly visible. Apply at a temperature between +8°C and +25°C, with a relative humidity of max. 82%, avoiding draughts. After finishing work, wash tools with warm water.