Product description

Jeger Primer Nubia this is a base for decorative effectsJeger Nubia. It evens out the absorbency of the substrate, strengthens and increases the adhesion of the decorative effect, and allows for proper application to achieve the desired result.

Surface preparation

The substrate should be dry, clean, and stable. Remove any damaged (e.g., flaking or cracked) coatings, adhesive paints, and lime. Fill any surface defects with a suitable filler and sand smooth. Clean previously painted surfaces of any contaminants that may reduce paint adhesion, e.g., dust, grease stains, rust, fungi, and mold.

Product application

Jeger Primer Nubia mix thoroughly. Do not dilute with water. Do not mix with other products. Apply the first coat with a microfiber roller, spreading it in a crisscross pattern, irregularly in all directions. Leave to dry for 2 hours. After this time, the surface can be covered with a decorative effect. If necessary, apply a second coat if the base color is clearly visible. Jeger Primer Nubia. Apply at temperatures between +8°C and +25°C, with relative humidity max. 82%, avoid drafts. After finishing work, wash tools with warm water.