Spread primer

Apply with a roller to a clean, dry, dust-free and degreased wall Jeger Primer Clay according to the instructions on the packaging and leave to dry for approximately 2 hours.

Apply decorative effect

Pierwszą warstwę Jeger Clay apply using a Venetian trowel to a thickness corresponding to the grain size, approx. 0.5 mm. Spread the product in all directions, avoiding any build-up of material. Leave to dry for approximately 4 hours. Apply the second coat with a Venetian trowel in small sections of approx. 1 m². Then, using a plastic finishing trowel, pre-smooth the fresh compound with circular movements. Once the material begins to dry, continue smoothing with the plastic trowel until a subtle texture is achieved. (Use only a plastic trowel for smoothing the finish, as using a Venetian trowel may alter the colour of the plaster.) Remember to carry out the application in stages. Leave to dry for approximately 4 hours.

Tip: In areas particularly exposed to moisture, use Jeger Protector Clay according to the instructions provided on the packaging.